Pressure Washing & Soft Wash in Salem, Oregon

Oregon grime is not desert dust. Moss, mildew, and algae grow on Willamette Valley surfaces for most of the year — so the method matters more than the pressure.

Get a Free Quote Call (971) 377-8760

Exterior cleaning built for Mid-Willamette Valley weather

Wet-climate growth behaves differently from dry dust, and reacts badly to the wrong method.

Moss and algae hold water against a surface, so they keep growing after a rinse — removal has to reach the root.
Mildew on north and east elevations feeds on shade and rain shadow, not on dirt.
Pressure alone drives organic growth into wood grain and opens seams instead of lifting it off.
Biodegradable detergent plus dwell time lifts growth off, then a low-pressure rinse carries it away.
Oregon runoff rules mean wash water should not run into a storm drain, so we control where it goes.

Services

House Washing

Soft wash for siding, trim, and exteriors — removes mildew, algae, and grime without the pressure that scars paint.

Driveways & Walkways

Concrete, pavers, and sidewalks. Organic growth, oil, rust, and tannin stains — matched to the stain, not just blasted.

Decks & Fences

Wood-safe cleaning that lifts grey weathering and growth without furring the grain or stripping your finish.

Gutter Cleaning

Fir needles, moss dams, and downspout flush — plus the honest call when the real problem is fascia, not debris.

Commercial

Storefronts, lots, dumpster pads, and fleets — scheduled around your hours so customers never walk through a wet entry.

Boats & RVs

Hull, gel coat, awning, and roof cleaning. Call to schedule — sized per unit, not per square foot.

Call to schedule

Soft wash or pressure — which this surface gets

We choose per surface, not per preference. The wrong choice is what causes streaks, furring, and stripped finish.

Surface	Method used	Why
Painted siding, fiber cement	Soft wash (low pressure)	Paint film and fibre are damaged by force
Vinyl siding	Soft wash (low pressure)	High pressure drives water behind the panels
Concrete, driveways	Pressure + surface cleaner	Hard enough for force, needs even coverage
Pavers	Pressure + re-sand	Joints need sand replaced after cleaning
Decks, fences (wood)	Soft wash, wood-safe	Force furs the grain and strips sealer
Roof, gutters exterior	Soft wash only	Asphalt and metal are damaged by pressure
Boat hulls, RV gel coat	Soft wash + hand detail	Gel coat scratches under force

Before and after

Real jobs, photographed on site. Captions state only what the photo shows.

Before exterior cleaning — Hard-surface and exterior cleaning. Captions state only what the photograph shows.

After exterior cleaning — Hard-surface and exterior cleaning. Captions state only what the photograph shows.

Why homeowners call us back

We tell you what a surface will and will not recover before we start.
We decline work we cannot do safely — height, condition, or fragile substrate.
Plants, pets, and foundation beds are wetted and rinsed around every wash.
You get a flat price before we start, not a number that grows on the day.

No years-in-business, job-count, or satisfaction statistics are published here, because we would rather you ask us directly than read a number we cannot source.

Questions we get asked

Do you use soft washing or pressure washing?

Both — chosen per surface. Siding, wood, roofs, and gel coat get soft wash at low pressure; concrete and hard paving get pressure with an even surface cleaner. Using one method everywhere is how surfaces get damaged.

Will washing damage my siding or paint?

Not with the method matched to the material. Damage comes from pressure on a surface that cannot take it, so painted siding, fiber cement, and wood never get blasted. If a surface is already failing, we say so before we start.

Are the cleaning products safe for plants and pets?

We use biodegradable detergents and wet down foundation beds and landscaping before and after, so runoff is diluted. We will tell you which areas to keep pets off until the surface is dry.

How is the price decided?

By surface area, the type of surface, how much growth is on it, and access. We give a flat price for the scope we agree on rather than a per-hour rate, because you should not be paying for our pace.

Do I need to be home?

No. For exterior work we need access to water and a clear path, and we will tell you before we arrive if anything needs moving. Most customers are out and come back to a finished job.